If you have followed all of the usage instructions and watched the video sections called Introduction, Overview, and Using the Demo Station, but things still don’t work, you can get out of trouble by trying any of the following:
DEMO STATION:
If you are unable to power on a component, check to see that the demo station main power switch is on. The light should be red.
PROJECTOR:
If you are unable to turn on the LCD Projector, check to see if there is a my.tv transmitter on top of the station and aim at it, or walk out into the room closer to the projector aiming either straight-on or underneath the projector, and power it on there. Hold down the Power button a little longer if necessary.If you can't see the image you want on the screen, there are two key places you need to look: the switch box and/or the input/selector button on the DVD sound component. If you still can't see, on the LCD remote aimed at the projector or at my.tv press video or input or source.
To turn off the projector, press the Power button two times quickly or a second time when needed. You will hear a sound, or if not, check to see that the light went out. The fan will continue to run a short while.
SOUND:
For sound, the DVD player or combination DVD/VHS player or the DVD 5 disc changer double as the sound system. Make sure this system is turned on. The light should be green. Red is off.Press the Selector or Input Selector button on the DVD player until DVD or VHS is displayed on the front panel.
For classrooms with a combination DVD/VHS player, press the Input Selector button until VHS is displayed on the front panel. Then press the channel button on the lower right to move up or down to the red AU. Both of these steps might be required for sound.
For Computer sound, press the Selector or Input Selector button on the stand-alone DVD player until AUX is displayed on the front panel.
COMPUTER:
On the LCD projector remote, press Camera or RGB aimed at the projector to view from the computer.For sound, turn on the DVD component, which doubles as the sound system. (See the previous section on SOUND.) Or manually turn on the speakers on top of the demo station.
DOCUMENT CAMERA:
Check the switchbox on top of or inside the station. Press Camera.When using the Canon or Elmo document camera in a room that does not have a switchbox but has a combination DVD/VHS component, this DVD player must be turned on. Press the Input Selector button until VHS is displayed on the front panel. Use the channel button on the lower right to move up or down to the red AU.
DVD/VCR COMPONENTS:
When using the DVD/VCR remote, always aim at the VCR/DVD player, which is usually located in the left side of the Demo Station cabinet.Get the DVD/VCR remote ready by pointing it at the player and pressing DVD/CD or VCR. The small button light will come on. If you are unable to use the remote, you can control the component manually, although you must use the remote to move through the menu of a DVD.
Check the Switch Box. Press DVD or VHS .
Check the “Selector” or “Input Selector” button on the DVD player. Press until DVD/CD or VCR is displayed on the front panel.
